Lanos SX Sedan L4-1.6L DOHC D-TEC MFI (2001)
Axle Beam: Service and Repair
Rear Axle Without ABS
REAR AXLE WITHOUT ABS
Disassembly Procedure
1. Remove the rear axle.
2. Remove the hub and bearing assembly. Remove the spindle from the rear axle.
3. Remove the rear brake assembly.
4. Remove the stabilizer shaft.
5. Remove the rear control arm bushings.
Assembly Procedure
1. Install the rear control arm bushings.
2. Install the stabilizer shaft.
3. Install the rear brake assembly.
4. Thinly coat the wheel spindle with anti-friction bearing grease in the area of the brake anchor plate. Install the spindle and the hub and bearing
assembly.
5. Install the rear axle.
6. Adjust the wheel bearing.