Lanos SX Sedan L4-1.6L DOHC D-TEC MFI (2001)
Windshield Washer Hose: Service and Repair
WINDSHIELD WASHER HOSES
REMOVAL PROCEDURE
1. Open the hood.
2. Disconnect the windshield washer hose from the washer nozzles on the hood.
3. Remove the front left wheel. Refer to Tires and Wheels.
4. Remove the screws and the front wheel well splash shield.
5. Disconnect the washer hose from the washer reservoir.
INSTALLATION PROCEDURE
1. Connect the washer hose to the washer reservoir.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
2. Install the front wheel well splash shield with the screws.
Tighten