Lanos SX Sedan L4-1.6L DOHC D-TEC MFI (2001)
Windshield Washer Pump: Service and Repair
WINDSHIELD WASHER PUMP(S) (Typical)
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the front left wheel. Refer to Tires and Wheels.
3. Remove the screws and the front wheel well splash shield.
4. Disconnect the electrical connector.
5. Disconnect the washer hose.
6. Remove the washer pump.
INSTALLATION PROCEDURE
1. Install the washer pump.
2. Connect the washer hose.
3. Connect the electrical connector.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
4. Install the front wheel well splash shield with the screws.