Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Seat Cushion: Service and Repair
Front Seat Cushion
(Power Driver Seat Shown, Manual Driver Seat Similar)
Removal Procedure
1. Remove the front seat from the vehicle.
2. Remove the seat cushion bolts.
3. Remove the cushion from the seat track.
Installation Procedure
1. Install the cushion onto the seat track.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
2. Install the seat track to the seat cushion with the bolts.
Tighten
Tighten the front seat cushion bolts to 12 Nm (106 lb.in).
3. Install the front seat in the vehicle.