Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Disassembly and Reassembly
CALIPER OVERHAUL
1. Remove the caliper.
WARNING: Do not attempt to catch the piston when attempting to remove the piston with compressed air. The piston will pop out of its
bore with enough force to damage a hand or fingers.
IMPORTANT: When removing the caliper piston with compressed air, place some rolled-up shop towels beneath the caliper to prevent damage
to the piston.
2. Apply unlubricated compressed air at the hose inlet of the caliper.
3. Remove the piston from its bore and remove the piston dust seal.
4. Remove the inner seal from the bore. Avoid scratching the bore.
