Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
13. Install the adjustment screw and the adjustment nut into the backplate actuation mechanism on the adjustment pawl side. Keep the shoe slot
parallel with the backplate face.
14. Install the pushrod into the tappet. Make sure the pushrod is set correctly into the lever socket by holding the lever into the backplate while
inserting the pushrod and the tappet.
15. Clean the excess grease away using a clean rag.
IMPORTANT: The shoe assembly must be resting on the shield with the brand side up.
IMPORTANT: Clean hands are required when handling the parking brake shoe.
16. Install the parking brake shoe, engaging the shoe tips in both the adjusting screw and the tappet slots.
17. Install the wheel hub assembly.
