Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
34. Install the oil pan retaining bolts.
Tighten
Tighten the oil pan retaining bolts to 10 Nm (89 inch lbs.).
35. Rotate the engine on the engine overhaul stand KM-412.
36. Install the rear timing belt cover.
37. Install the rear timing belt cover bolts.
Tighten
Tighten the rear timing belt cover bolts to 6 Nm (53 inch lbs.).
38. Install the crankshaft timing belt drive gear and the bolt.
Tighten
Tighten the crankshaft timing belt drive gear bolt to 130 Nm (96 ft. lbs.). Using the angular torque gauge KM-470-13, tighten the bolt an
additional turn of 40 to 50 degrees.
39. Install the engine mount and the retaining bolts.
Tighten
