Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
10. Disconnect the Manifold Absolute Pressure (MAP) sensor connector.
11. Disconnect the coolant hoses at the throttle body.
12. Disconnect the vacuum hoses as needed, including the vacuum hose at the fuel pressure regulator and the brake booster vacuum hose at the intake
manifold.
13. Disconnect the throttle cable from the throttle body and the intake manifold.
14. Remove the throttle cable bracket bolts from the intake manifold.
15. Remove the throttle cable bracket.
16. Remove the generator-to-intake manifold strap bracket bolts and the strap.
17. Remove the power steering hose clamp bolt, and position the hose clear of the repair area.
18. Remove the fuel rail and the injector cover as an assembly. Refer to Powertrain Management.
19. Remove the generator-to-intake manifold support bracket bolts.
20. Remove the generator-to-intake manifold support bracket.
21. Remove the intake manifold support bracket bolt at the engine block and the intake manifold.
22. Remove the intake manifold support bracket.
23. Remove the intake manifold retaining bolts and the nuts in the sequence shown.