Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Installation Procedure
1. Install the air filter into its cavity in the bulkhead.
-
Align the fins on the plastic frame of the filter with the grove in the holder before attempting to insert the filter into place.
2. Install the air filter cover with the arrow pointing up.
3. Install the nut to secure the air filter cover to the bulk- head.
Tighten
Tighten the air filter cover nut to 4 Nm (35 lb.in).
REMOVAL PROCEDURE WITH ELECTRONIC CLIMATE CONTROL
1. Remove the two nuts that secure the vacuum tank to the bulkhead.
