Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
25. Install the front timing belt cover bolts.
Tighten
Tighten the front timing belt cover bolts to 6 Nm (53 inch lbs.).
26. Install the crankshaft pulley.
27. Install the crankshaft pulley bolts.
Tighten
Tighten the crankshaft pulley bolts to 20 Nm (15 ft. lbs.).
28. Install the right engine mount bracket. Refer to Engine Mount; Service and Repair.
29. Install the serpentine accessory drive belt. Refer to Steering; Power Steering Pump.
30. Install the right front wheel well splash shield.
31. Install the right front wheel.
32. Install the air filter housing.
33. Install the air filter housing bolts.
Tighten
Tighten the air filter housing bolts to 8 Nm (71 inch lbs.).
34. Connect the air intake tube to the throttle body.
35. Connect the breather tube to the valve cover.
