Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Timing Belt: Service and Repair
REMOVAL PROCEDURE
CAUTION: The 2.2 DOHC is an interference engine; therfore, align the crankshaft, camshaft and timing belt as described in this service
procedure to prevent damage to the engine.
1. Disconnect the negative battery cable.
2. Disconnect the Intake Air Temperature (IAT) sensor connector.
3. Disconnect the air intake tube from the throttle body.
4. Remove the resonator retaining bolts and the resonator from the throttle body.
5. Disconnect the breather tube from the valve cover.
6. Remove the air filter housing bolts.
7. Remove the air filter housing.
8. Remove the right front wheel.
9. Remove the right front wheel well splash shield.
10. Remove the serpentine accessory drive belt. Refer to Steering; Power Steering Pump..
