Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Coolant Temperature Sensor / Switch HVAC: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the audio system and the center tray.
3. Remove the glove box.
4. Remove the heater/air distributor case assembly lower cover screws.
5. Remove the heater/air distributor case assembly lower cover to gain access to the coolant temperature sensor.
6. Turn the sensor to release it from the heater/air distributor case housing.
7. Disconnect the electrical connector.
Installation Procedure
