Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Power Steering Line/Hose: Service and Repair
Power Steering Pump Hoses and Pipes
Removal Procedure
1. Siphon the power steering fluid from the fluid reservoir.
2. Disconnect the pressure line pipe and the supply line hose from the inlet and outlet connections on the power steering pump.
3. Disconnect the return line from the fluid reservoir.
4. Loosen the retaining clip located above the alternator and position it away from the pressure line.
5. Raise and suitably support the vehicle.