Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
1. Raise the crossmember and align the front attachment points with the body posts of the vehicle. Install the crossmember assembly.
2. Install the crossmember-to-body front nuts and the washers.
Tighten
Tighten the crossmember-to-body front nuts to 145 Nm (107 ft. lbs.).
3. Install the crossmember-to-body rear bolts.
Tighten
Tighten the crossmember-to-body rear bolts to 145 Nm (107 ft. lbs.).
4. Connect the power steering gear.
5. Connect the control arms to the steering knuckle. See: Control Arm/Service and Repair
6. Install the center member.
7. Install the exhaust pipe and the main catalytic converter into the vehicle.
8. Install the wheels.
9. Lower the vehicle.
