Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
7. Remove the strut assembly.
Installation Procedure
1. Install the strut assembly.
2. Connect the strut assembly to the steering knuckle by installing the steering knuckle-to-strut assembly nuts and the bolts.
Tighten
Tighten the steering knuckle-to-strut assembly nuts and the bolts to 135 Nm (100 ft. lbs.).
3. Install the brake line to the securing bracket on the strut assembly.
4. On vehicles equipped with the Anti-lock Brake System (ABS), connect the ABS sensor line to the strut assembly.
5. Install the wheel.
6. Lower the vehicle.