Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
7. Install the nuts securing the strut assembly to the body of the vehicle.
Tighten
Tighten the strut assembly-to-body nuts to 45 Nm (33 ft. lbs.).
Disassembly and Reassembly
FRONT STRUT ASSEMBLY
-
Tools Required
-
KM-329-A Spring Compressor
-
DV-005 Front Strut Mount Nut Wrench
Disassembly Procedure
1. Remove the strut assembly.
2. Fasten the strut assembly to the spring compressor KM-329-A. Make sure the hooks are seated on the strut spring properly.
3. Compress the front spring with the spring compressor KM-329-A.
4. Remove the dust cover from the bearing assembly.
