Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Shifter A/T: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the right and the left front lower trim panels, the shift control panel, and the floor console.
3. Remove the Transmission Range (TR) switch.
4. Remove the nuts from the shift control cable mounting bracket at the front of the shift control assembly.
5. Loosen the nut on the shift control cable adjuster pinch bolt.
6. Slide the shift control cable out of the shift control cable adjuster and remove the pinch bolt.