Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
Notice: Discard the TFT sensor O-ring.
6. Remove the TFT sensor.
Installation Procedure
Notice: Lubricate the Transmission Fluid Temperature (TFT) sensor O-ring with Texaco 1854 automatic transmission fluid.
1. Install a new O-ring on the TFT sensor.
2. Install the TFT into the transaxle case hand tight.
Tighten
Tighten the TFT sensor to 7 - 13 Nm (62 - 115 inch lbs.).
3. Install the TFT sensor protector and nut and bolt.
Tighten
Tighten the nut and bolt to 20 - 29 Nm (15 - 22 ft. lbs.).