Leganza CDX L4-2.2L DOHC D-TEC MFI (1999)
4. Pry the wiper arm linkage off the motor driveshaft.
5. Disconnect the electrical connector.
6. Remove the bolts and the wiper motor.
Installation Procedure
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
1. Install the wiper motor with the bolts.
Tighten
Tighten the wiper motor bolts to 4 Nm (36 lb.in).
2. Connect the electrical connector.
