Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
1. Connect the electrical connector and the drain hose to the antenna motor, (if equipped).
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
2. Install the antenna motor with the nuts.
Tighten
Tighten the antenna motor nuts to 4 N.m (35 lb-in).
3. Install the rubber grommet and the antenna cap nut.
Tighten
Tighten the antenna cap nut to 2.5 N.m (22 lb-in).
4. Install the luggage compartment wheelhouse trim panel.
5. Connect the negative battery cable.