Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Speaker: Service and Repair
Rear Speakers
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the deck lid sill plate cover.
3. Disconnect the electrical connector.
4. Remove the screws and the rear speakers.
Installation Procedure
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
1. Install the rear speakers with the screws.
Tighten
Tighten the rear speaker screws to 2 N.m (18 lb-in).
2. Connect the electrical connector.
3. Install the deck lid sill plate cover.
4. Connect the negative battery cable.
