Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Front Door Striker: Service and Repair
Door Lock Striker
(Front Door Shown, Rear Door Similar)
Removal Procedure
1. Remove the screws and the door lock striker. (Front door shown, rear door similar.)
Installation Procedure
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
1. Install the screws and the door lock striker.
Tighten
Tighten the door lock striker screws to 24 N.m (18 lb-ft).