Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
1. Raise the crossmember and align the front attachment points with the body posts of the vehicle. Install the crossmember assembly.
2. Install the crossmember-to-body front nuts and the washers.
Tighten the crossmember-to-body front nuts to 145 Nm (107 ft. lbs.).
3. Install the crossmember-to-body rear bolts.
Tighten the crossmember-to-body rear bolts to 145 Nm (107 ft. lbs.).
4. Connect the power steering gear.
5. Connect the control arms to the steering knuckle.
6. Install the center member.
7. Install the exhaust pipe and the main catalytic converter into the vehicle.
8. Install the wheels.
9. Lower the vehicle.
