Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Headliner: Service and Repair
Formed Headliner
Tools Required
KM-475-B Trim Remover
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the sunroof molding, it equipped.
3. Remove the passenger assist handles.
4. Remove the plastic retaining clips in the headliner on the driver's side.
5. Remove the sun visors.
6. Remove the power sunroof control switch, if equipped.
7. Remove the ultrasonic sensor.
8. Remove the A-, B-, and C-pillar trim panels.
9. Remove the plastic retainers in the headliner using the trim remover KM-475-B.
10. Recline both front seats.
11. Remove the headliner through a rear door.
Installation Procedure
