daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

Weatherstrip > < Hood Sensor/Switch (For Alarm)|Service and Repair
Page 1
background image

Sunroof / Moonroof Switch: Service and Repair

Power Sunroof Control Switch

Removal Procedure

1. Disconnect the negative battery cable.
2. Pry off the interior courtesy lamp lens.
3. Remove the screws and the switch.
4. Disconnect the electrical connector.

Installation procedure

1. Connect the electrical connector.

NOTE:  Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to Use the correct fasteners to prevent premature
corrosion.

2. Install the sunroof control switch with the screws.

Tighten
Tighten the power sunroof control switch screws to 2 N.m (18 lb-in).

3. Install the interior courtesy lamp lens
4. Connect the negative battery cable.

Weatherstrip > < Hood Sensor/Switch (For Alarm)|Service and Repair