Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Brake Caliper: Service and Repair
Front
Removal and Installation
Removal Procedure
1. Raise and suitably support the vehicle.
2. To retain wheel balance, mark the position of the front wheel relative to the wheel hub. Remove the wheel.
3. Remove the caliper brake hose inlet bolt. Remove the ring seals.
4. To prevent fluid loss or contamination, plug openings at the caliper inlet and the brake hose.
5. Remove the caliper mounting bolts.
6. Remove the caliper.
Installation Procedure