Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
5. Slide the dust cover onto the dust cover notches.
6. Insert the lever and the dust cover assembly into the backplate.
7. Secure the dust cover retainer with pop rivets.
8. Lubricate the actuation cavity and the tappet with the grease. Make sure that the internal bore of the cavity is covered with the grease.
9. Secure the splash shield and the backplate to the steering knuckle with the bolts.
Tighten the splash shield bolts to 65 Nm (48 ft. lbs.).
10. Secure the parking brake shoe hold-down spring assembly with the screw.
Tighten the parking brake shoe hold-down spring assembly screw to 4 Nm (35 inch lbs.).
11. Connect the parking brake adjustment screw to the adjustment nut.
12. Tighten the adjustment nut to the point at which it meets the screw, and then back off one-quarter turn.
