Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
1. Install the caliper with the mounting bolts. Tighten
Tighten the caliper mounting bolts to 65 Nm (48 ft. lbs.).
2. Connect the brake hose with the bolt and ring seals.
Tighten the brake hose inlet bolt and ring seals to 32 Nm (24 ft. lbs.).
3. Install the rear wheels.
4. Lower the vehicle.
5. Fill the master cylinder to the proper level with clean brake fluid.
6. Bleed the caliper.
Disassembly and Reassembly
Removal Procedure
1. Remove the caliper.