Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Brake Hose/Line: Service and Repair
Front
Removal Procedure
1. Raise and suitably support the vehicle.
2. Disconnect the brake line from the brake hose support bracket on the wheel housing on each side of the vehicle.
3. Remove the retainer.
4. Remove the brake hose from the wheel housing bracket.
5. Remove the retainer and disconnect the brake hose at the steering knuckle shaft bracket.
6. Remove the bolt from the brake caliper.
7. Remove the ring seals and the disc brake hose.