Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Brake Master Cylinder: Service and Repair
Removal and Installation - Reservoir
Removal Procedure
Important: Remove the brake fluid reservoir only when it must be replaced because of damage or leaks.
1. Disconnect the harness connector that is mounted to the top of the brake fluid reservoir.
2. Remove the brake fluid level switch and wire harness. Slide the switch out of the reservoir. It is not necessary to drain the fluid.
3. For vehicles with the manual transaxle, disconnect the clip that secures the clutch hose connection to the master cylinder and move the clip out of
the way.
4. Remove the clutch hose from the master cylinder.
