Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
1. Insert the ABS 5.3 hydraulic unit into its mounting bracket and install the nuts.
Tighten the ABS 5.3 mounting nuts to 10 Nm (89 inch lbs.).
2. Remove the screw plugs and install all of the hydraulic brake pipes.
Tighten the brake pipe nuts to 16 Nm (12 ft. lbs.).
3. Connect the 26- or 31 -pin wiring harness connector.
4. Connect the negative battery cable.
5. Bleed the hydraulic system.
