Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Coolant Temperature Sensor/Switch (For Computer): Description and Operation
The Engine Coolant Temperature (ECT) sensor is a thermistor (a resistor which changes value based on temperature) mounted in the engine coolant
stream. Low coolant temperature produces a high resistance (100,000 ohms at -40 °F [-40 °C]) while high temperature causes low resistance (70 ohms
at 130 °F [266 °C]).
The Engine Control Module (ECM) supplies 5 volts to the ECT sensor through a resistor in the ECM and measures the change in voltage. The voltage
will be high when the engine is cold and low when the engine is hot. By measuring the change in voltage, the ECM can determine the coolant
temperature. The engine coolant temperature affects most of the systems that the ECM controls. A failure in the ECT sensor circuit should set a
Diagnostic Trouble Code (DTC) P0117 or P0118. Remember, these DTC indicate a failure in the ECT circuit, so proper use of the chart will lead either
to repairing a wiring problem or to replacing the sensor to repair a problem properly.
