Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
1. Install the coolant temperature sensor into the heater/air distributor case housing and turn the sensor to lock it.
2. Connect the electrical connector.
3. Install the heater/air distributor case assembly lower cover into position.
4. Install the heater/air distributor case assembly lower cover retaining screws and tighten.
5. Install the audio system and the center tray. Refer to Audio Systems.
6. Install the glove box. Refer to Instrumentation/Driver Information.
7. Connect the negative battery cable.