Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
9. Remove the front timing belt cover bolts and the front timing belt cover.
10. Turn the crankshaft gear bolt to align the timing mark pointer on the crankshaft pulley with the timing marks on the rear cover of the camshaft
gears.
11. Loosen the timing belt automatic tensioner bolt.
12. Turn the hex-key tab to relieve belt tension.
13. Remove the timing belt idler pulley nuts.
14. Remove the timing belt idler pulley.
15. Remove the engine mount retaining bolts.
16. Remove the engine mount.
Installation Procedure
1. Install the engine mount.
2. Install the engine mount retaining bolts.
-
Tighten the engine mount bolts to 60 Nm (44 ft. lbs.).