Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Parking Lamp: Description and Operation
Parking and Turn Signal Lamps
Parking and Turn Signal Lamps
The parking lamps can be turned on by turning the headlamp switch to the first position. The parking lamps can be turned off by turning the switch off.
When the turn signals are activated, the appropriate turn signal lamps flash to signal a turn. The front, the rear, and the side turn signals work only when
the ignition is on.
The front and the rear turn signals are controlled by the multifunction lever on the left side of the steering column. Moving the lever all the way up or
down past the detent will turn on the turn signals. When the turn is complete, the lever will automatically release, and the front and the rear turn signals
will stop flashing.
For changing lanes or shallow turns in which the steering wheel does not turn far enough to cancel the signal, move the signal to the first detent and hold
it there. The turn signal will cancel when the lever is released.
