Leganza SE L4-22L DOHC D-TEC MFI (2001) A/T Fluid - Component Info - Specifications
Fluid - A/T: Testing and Inspection
CHECKING PROCEDURE
Notice: Check the fluid level when the transaxle temperature is above 80°C (176°F).
Notice: During the fluid level check, the selector lever must be in position P.
Notice: When adding fluid or making a complete fluid change, always use TOTAL FLUID HX. Failure to use the proper fluid will cause hose and
seal damage and fluid leaks.
1. Make sure the vehicle is level.
2. Remove the transaxle fluid dipstick and check the transaxle fluid level.
3. The correct fluid level must be between the MIN and the MAX notches on the dipstick.
4. If the fluid level is below the MIN notch, add transaxle fluid through the fluid filler tube and check for leaks in the transaxle.
5. If the fluid is above the MAX notch, the transaxle is overfilled. Drain some of the fluid through the fluid pan drain plug. Check the transaxle fluid
level.