Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
2. Install the auxiliary catalytic converter lower flange bolts.
^
Tighten the auxiliary catalytic converter-to-connecting pipe nuts to 40 Nm (30 ft. lbs.).
3. Install the splash guard.
4. Lower the vehicle.
5. Install the auxiliary catalytic converter upper flange bolts.
^
Tighten the auxiliary catalytic converter-to-exhaust manifold nuts to 40 Nm (30 ft. lbs.).
6. Connect the post-converter heated oxygen sensor electrical connector.