Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Refueling Vapor Recovery System: Description and Operation
ON BOARD REFUELING VAPOR RECOVERY (ORVR) SYSTEM
The Leganza is equipped with an On Board Refueling Vapor Recovery System (ORVR). This system has been developed and equipped to meet
enhanced evaporative emission control requirements during vehicle moving, parking and refueling. The Daewoo ORVR system operates in the following
manner:
-
One canister collects evaporative vapors while the vehicle is moving, parking and refueling.
-
Collected vapor flows into the engine through the intake manifold where it is consumed during vehicle operation.
-
Fuel flowing through a reduced diameter section in the filler pipe creates suction in the filler neck.
The Daewoo ORVR system operates by the Liquid Trap (Liquid Seal) system which ensures long-term durability. The Daewoo ORVR system has been
designed with the following functional features:
-
Collection and routing of refueling vapors to the canister.
-
Nozzles that are compatible with conventional and Stage II vapor recovery nozzles.
-
Fuel shut-off signal.
-
Prevention of liquid fuel entering the canister during normal driving and during vehicle rollover.
-
Fuel tank over-pressure prevention.
-
Fuel tank venting to canister during vehicle operation.
-
Fuel vapor dome overfill protection.
The Leganza is also equipped with an On Board Diagnostic II (OBD II) system. This system identifies failures or malfunctions of the ORVR system and
warns the driver through the Malfunction Indicator Lamp (MIL) on the instrument cluster.
The ORVR system requires no special refueling procedures and maintenance.
The Daewoo ORVR system and all fuel system components are designed to prevent electrostatic discharge using techniques recommended by SAE
J1645. The Daewoo test procedure (EDS-T-5005) is similar to the SAE J1113 test procedure.
