Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Blower Motor Relay: Service and Repair
High Blower Relay - Manual A/C
High-Blower Relay
Removal Procedure
1. Disconnect the negative battery cable.
2. Locate the relay box under the instrument panel on the left side.
3. Pull out the high-blower relay at the front of the relay box.
Installation Procedure
1. Align the high-blower relay contacts with the relay terminal slots.
2. Push the relay firmly into base. The relay must be seated and flush with the base edge.
3. Connect the negative battery cable.
