Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
1. Install the chime module with the screws.
Tighten
Tighten the chime module screws to 4 N.m (35 lb-in).
2. Connect the electrical connector.
3. Install the instrument panel side trim cover with the screw.
Tighten
Tighten the instrument panel side trim cover screw to 2.5 N.m (22 lb-in).
4. Install the knee bolster trim panel with the hood release handle screw.
Tighten
Tighten the hood release handle screw to 2.5 N.m (22 lb-in).
5. Connect the negative battery cable.