Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
1. Turn the front wheels straight ahead.
2. Install the clock spring with the screws.
Tighten
Tighten the clock spring mounting screws to 1.25 N.m (11 lb-in).
IMPORTANT: The clock spring may come packed in material used to prevent damage to the spring during shipping or storage. Avoid installing
any of the packing material with the clock spring.
3. Turn the lobe of the clock spring clockwise to lock.
4. Turn the lobe of the clock spring counterclockwise approximately three turns to the neutral position, with the front wheels straight ahead.
5. Properly align the pointed marks on the components of the clock spring.
6. Connect the electrical connectors on the lower steering column.
7. Install the driver knee bolster trim panel and the knee bolster. Refer to Interior Trim.
8. Install the steering wheel. Refer to Steering Wheel and Column.
9. Connect the driver airbag module and the horn connectors.
10. Install the driver airbag module. Refer to "Driver Airbag Module".
11. Reinstall the airbag fuse F15 which was removed when disabling the SIR system.
