Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Seat Belt: Service and Repair
Two-Point Lap Rear Center Seat Belt
REMOVAL PROCEDURE
1. Remove the rear seat cushion. Refer to Seats.
2. Remove the bolts and the seat belt anchors.
INSTALLATION PROCEDURE
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
1. Install the seat belt anchors with the bolts.
Tighten
Tighten the seat belt anchor bolts to 38 N.m (28 lb-ft).
2. Install the rear seat cushion. Refer to Seats.
