Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Coolant Temperature Sensor / Switch HVAC: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the audio system and the center tray. Refer to Audio Systems.
3. Remove the glove box. Refer to Instrumentation/Driver Information.
4. Remove the heater/air distributor case assembly lower cover screws.
5. Remove the heater/air distributor case assembly lower cover to gain access to the coolant temperature sensor.
6. Turn the sensor to release it from the heater/air distributor case housing.
7. Disconnect the electrical connector.
Installation Procedure
