Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
1. Insert the CKP sensor into the engine block
2. Install the CKP sensor retaining bolt.
Tighten
Tighten the crankshaft position sensor retaining bolt to 8 N.m (71 lb-in).
3. Connect the CKP sensor connector.
4. Install the accessory mounting bracket with the bolts.
Tighten
Tighten the accessory mounting bracket bolts to 26 lb-ft (35 N.m).
5. Install the rear A/C mounting bracket.
Tighten
Tighten the rear A/C mounting bracket bolts to 26 lb-ft (35 N.m).
6. Install the A/C compressor. Refer to Automatic Temperature Control Heating, Ventilation, and Air Conditioning System.
7. Install the power steering pump. Refer to Power Steering Pump.
8. Connect the negative battery cable.
