Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
6. Remove the TFT sensor.
Installation Procedure
Notice: Lubricate the TFT sensor O-ring with TOTAL FLUID HX.
1. Install a new O-ring on the transmission fluid temperature (TFT) sensor.
2. Install the TFT into the transaxle case hand tight.
-
Tighten the TFT sensor to 62 - 115 inch lbs. (7 - 13 Nm).
3. Install the TFT sensor protector and nut and bolt.
-
Tighten the nut and bolt to 15 - 22 ft. lbs. (20 - 29 Nm).
4. Install the engine undercover.
