Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Neutral Safety Switch: Service and Repair
Removal Procedure
1. Remove the battery and battery tray.
2. Disconnect the Park/Neutral Position (PNP) switch electrical connector from the wiring harness.
3. Remove the nut retaining the shift control cable linkage to the PNP switch and the nut retaining the fluid filler tube to the PNP switch stud bolt.
4. Remove the bolt, nut and washer and stud bolt retaining the PNP switch to the transaxle case, then remove the PNP switch.
Installation Procedure
