Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Steering Shaft: Service and Repair
INTERMEDIATE SHAFT AND DASH SEAL
Removal Procedure
1. Turn the steering wheel until it is horizontal, with the spokes pointing down. This is the straight-ahead position. Make a mark on the stub shaft
housing that lines up with a mark on the intermediate shaft lower universal joint. This mark will be used for proper alignment during installation.
2. Remove the lower pinch bolt from the universal joint on the intermediate shaft.
3. Turn the steering wheel so that the upper pinch bolt is accessible. Remove the upper pinch boy from the universal joint on the intermediate shaft.