Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
1. Clip the contact ring on the steering wheel, if necessary.
Important: In order to correctly install the steering wheel, match-mark the steering column shaft to the steering wheel.
2. Align the match marks on the steering wheel and the steering column shaft. Turn the signal canceling cam on the wheel to the left.
3. Install the retaining clip and the steering wheel nut.
Tighten the steering wheel nut to 38 Nm (28 ft. lbs.).
4. Bend the tabs to secure the retaining clip.
5. Install the SIR module.
6. Connect the negative battery cable.
