Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
Control Arm Bushing: Service and Repair
CONTROL ARM BUSHINGS
-
Tools Required
-
KM-508-A Remover/Installer
-
KM-307-B Removal Plate
Disassembly Procedure
1. Remove the control arm.
2. Remove the control arm rear bushing using a press, the removal plate KM-307-B, and a drift.
3. Remove the control arm front bushing using a press, the remover/installer KM-508-A, and the removal plate KM-307-B.
Assembly Procedure
1. Coat the control arm rear shaft with a multipurpose lubricant.