Leganza SE L4-2.2L DOHC D-TEC MFI (2001)
7. Remove the shift control cable from the shift control assembly by holding one nut with a wrench while loosening the other with a wrench.
8. Pull the shift control cable through the firewall along with the grommet from beneath the vehicle.
Installation Procedure
1. Push the shift control cable through the firewall into the passenger compartment. Seat the rubber grommet in the firewall. (Hint: use foaming glass
cleaner to ease installation).
2. Move the transaxle shift lever to the park position, then install the shift control cable into the transaxle mount bracket.